My OS is Windows XP Pro and I open telnet by opening "RUN" and clicking on
one of the cluster addresses. Has worked for years this way. I do not go
through DX4WIN or any other program. Rebooting does not make it work. Tried
that several times.
Dick KS0M
-----Original Message-----
From: davidnj@gmail.com [mailto:davidnj@gmail.com]On Behalf Of David Levine
Sent: Sunday, August 23, 2009 8:14 PM
To: Dick White
Subject: Re: [RTTY] telnet problem
Are you doing a straight telnet from a DOS (or MAC) command prompt or are
you using some windowed client application?
Of course, my first advice would be to reboot and try again. Sometimes that
just works.
David - K2DSL
On Sun, Aug 23, 2009 at 8:57 PM, Dick White <whiter26@sbcglobal.net> wrote:
This is not a RTTY question but the best place I know to get some help.
For
the past two days I have been unable to open any telnet cluster. It just
suddenly happened when I tried to open KY4DX. I also tried dxc.w9zry.net
and
dxc.ad1c.us with the same results. I thought KY4DX was just down the first
day. Sunday is the 3rd day I can't access any of these clusters. Any
idea's
and help appreciated. I have not changed any settings on the radio or
computer.
Dick KS0M
Richard C. "Dick" White
Fulton, MO. 65251 U.S.A.
whiter26@sbcglobal.net
_______________________________________________
RTTY mailing list
RTTY@contesting.com
http://lists.contesting.com/mailman/listinfo/rtty
|