Hi Paul,
Thanks for the reply.
Does the leading 'T' or '0' command work for you as well?
I can only get a 'T' for the leading Zero.
This is all after reading the comments on contesting reflector after the ARRL
10M contest, where the use of shortened numbers seems to be depreciated big
time.
BTW now using the SCP and ESM functions all the time after your talk at the
RSGB convention. Great!
73 de Paul G3WYW
Sent from my Samsung Galaxy smartphone.
-------- Original message --------
From: Paul O'Kane <pokane@ei5di.com>
Date:18/12/2014 18:22 (GMT+00:00)
To: sd-user@contesting.com
Cc:
Subject: Re: [SD-User] Shortened numbers
On 18/12/2014 17:55, Paul Bigwood wrote:
> Can't seem to make SD send full numbers. I have gone in via CWZERO command
There does seem to be a problem with 1 and A, in
that you can change 1 to A, but not A to 1 - all
using CWZERO. However, with V17.51 CWZERO seems
to work with toggling between 9 and N (in both
directions).
> and also editing the .ini file directly to
> show full characters,
My SD.INI entry reads 019N5
and it seems to work - for serials in exchanges
0 - sends non-leading zeros as ----- (in full)
1 - sends 1 as 1 (not A)
9 - sends 9 as 9 (not N)
N - does not suppress leading zeros
5 - Serial Padding Factor of 5 - greater spacing between serial elements
I need to fix toggling from A to 1 in CWZERO,
but I believe that's all?
73,
Paul EI5DI
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|