I hate typing the word plaque.
Just got a call from the outfit who will make them, and they informed
me they should be ready about April 6. I will go by again and
personally inspect that each is properly addressed/boxed for mailing.
At this time, 1417 EST, I have 7 confirmed sponsors, all from the
SECC. I will accept the next 3 in the order I get them. NO exceptions.
I have had no contact from the SEDXC indicating their sponsorship,
although their logo will be on the P.
I also ordered the 2000 Ps, and will make up the new plates for the
winners from that. If you do want to sponsor a P, please let me know
ASAP
Have changed the design a little, it will now appear roughly as
follows:
----------------------------------------------------------------------
GEORGIA QSO PARTY
1999
Logo of SECC
Logo of SEDXC
------------------------------------------------------------------------
Small brass plate naming winner, donor, category.
----------------------------------------------------------------------
I do need one additional thing. Probably from Nancy. The SECC logo was
taken off a photocopy of my T shirt, and of course, it shows stitching
around the name of the club. It's not going to be a serious problem,
but I sure could use the original artwork that went to the T
shirt/jacket maker, or failing that, get a plate made up from him with
just the logo.
Ps are destined for mailing about April 6. Also ordered the Ps for
2000 and as soon as I line up the winners with the sponsors, I will
get that information to them. Those Ps will also go out on the same
date.
At this time, assuming I don't get killed for the design, I see no
reason that the 2001 Ps cannot be shipped out by the end of August,
2001 at the latest. All I need are the winners and sponsors, a week to
make the Ps, and that's it.
Many thanks to all of you for your fine support.
NEVER volunteer for ANYTHING.
):>
Ed
--
SECC on the Web: http://secc.contesting.com/
Submissions: secc@contesting.com
Administrative requests: secc-REQUEST@contesting.com
Problems: owner-secc@contesting.com
|