Pass this around guys.
Dan/W4NTI
> [Original Message]
> From: Nelle Sine <mnsine at bellsouth.net>
> Date: 5/14/2007 4:06:05 AM
> Subject: Fw: V26HS on 6m
>
> I'm sending this email to stations I worked on HF on previous trips who
> expressed an interest in a V2 QSO on 50 MHZ.
> The following is latest operating plans:
> >
> >> If murphy does not strike, I will arrive 9 June. I expect to have the
6M
> >> antenna up and rig on 50 Mhz around 2230z. I'll stay on 6M and 2M 9
and
> >> 10 June for the ARRL VHF contest. Expect to be on either
10,12,15,17,20,
> >> or 40M starting around 1200z 11 June, IF 6M is not open. 6M will
always
> >> be the priority and I'll have a RCI- 5054dx 6M xcvr on 50.125/50.110
> >> scanning for an opening, even if I go to HF with the Icom. I will have
a
> >> 2 element Yagi for 10,12,15 and 17M so signals should be stronger this
> >> trip. I'll also have 10 elements on 2M SSB with 350 watts for island
to
> >> island QSO's and any possible 2M E openings. The last antenna to come
> >> down will be the 6M Yagi around 1600z 24 June. If you hear me on
50Mhz
> >> and can't break a pile-up or get my attention call me at (268)
460-7039,
> >> I or XYL Yasmine will answer, and I will make the extra effort,
> >> sorry I will not have internet, however, FJ5DX often relays info to me
> >> posted on the DX SUMMIT concerning 6M. Main 6M rig is
an
> >> Icom IC-706 driving a TE 0552G solid state 350 watt amp with pre-amp.
> >> Antenna is a modified Hi-Par 6 element Yagi on 17 foot boom. Antenna
> >> will be on the roof deck of the house which is on a 300 foot hill.
> >> >
> 73, Howard V26HS Grid FK 97 QSL via WB4WXE
>
|