I am sending commands to my 1000mp and all is fine, however I put
the strings into the cfg file with a text editor rather than using the
programme.
They remain in tact when I unload and reload tr.
A great feature Tree. For others info I am using the commands to set
the A=B and A/B buttons, this is great when doing s/p with the shift
keys, when a station is messing around with an exchange and you
want to mark him and move on it saves moving from the keyboard
to the radio and back again.
Any other useful ideas ?
Jan G0IVZ
-----Original Message-----
From: n6tr@teleport.com <n6tr@teleport.com>
To: n4vi@diac.com <n4vi@diac.com>; trlog@contesting.com
<trlog@contesting.com>
Date: 16 January 1999 17:22
Subject: Re: [TRLog] send string command
>
>> So it appears to me that TR cannot correctly intrepret the serial string
>> lines when it has to load them from the logcfg.dat file. Anyone else
>> encounter this or figure out a workaround besides not exiting TR after
>> you setup the commands?
>
>I'll look into this.
>
>> 1. Is it possible to send multiple strings with one command. for
>> example:
>>
>> <Ctrl-C> string1 <Ctrl-D> <Ctrl-c> string2 <Ctrl-D> ?
>
>Yes.
>
>> 2. If you should be able to send multiple commands, does there have to
>> be a <Ctrl-C>, <Ctrl-D> sequence around EACH command or just surrounding
>> the group of commands?
>
>Around each commnd.
>
>Tree
>
>--
>FAQ on WWW: http://www.contesting.com/trlogfaq.html
>Submissions: trlog@contesting.com
>Administrative requests: trlog-REQUEST@contesting.com
>Problems: owner-trlog@contesting.com
>Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
>
>
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|