* In WPX contest (and others with prefix multipliers) is no possibility to show
worked multipliers. That could be e.g. as follows:
- nothing in CALL window, AltG pressed -> all prefixes worked are displayed
(alphabetically sorted)
- "J" in CALL window, AltG pressed -> prefixes worked starting with J (J2, J3,
J6, J7, JA1, JA2, ...)
- "JA" in CALL window, AltG pressed -> prefixes worked starting with JA (JA1,
JA2, ...)
* If in the end of any CW message is change of the speed, this command is not
executed (speed is not changed).
* Command Control-U in memory message could update CallsignICameBackTo variable
with the call window contents or callsign in exchange window (new written), if
there is. Now, if I write corrected callsign in exchange window, then use
message with Control-U, CALL OKAY NOW message is sent always. So that means
Control-U command not works with callsign in exchange window.
* Add switch to filter WARC-bands and VHF-bands spots from Bandmap (in case
BAND MAP ALL BANDS = true)
* Add more possibilities to finish QSO (QSLing). Now there are two ways only:
QSL (Enter) or Quick QSL (e.g. backslash). It would be very nice if I could
finish QSO with another programmable manners, e.g.:
- TU JOHN (name from TRMASTER.DTA)
- 73
- QRV 80M?
- CIAO JOE (salutation from HELLO.DAT and name from TRMASTER.DTA)
This feature could be implemented e.g. by special control character located in
EX MEMORY string, which evoke logging QSO.
73 & CU in WPX (OL5Y, SOSB 10m)
Martin Huml
OK1FUA, OL5Y or IH9/OL5Y in the contests
OL5Y@contesting.com
Contest Team Pantelleria - IH9P - CQWW DX SSB MULTI/MULTI
http://www.fortunecity.com/skyscraper/eudora/126/ih9p.html
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|