Has there been an update/patch to fix the use of the shift keys for QSY on
the 1000mp? If I understand the docs correctly, the shift keys should vary
the main VFO when in s/p mode (which they do) and the RIT when in run mode
(which they don't). Hitting both shifts at the same time should clear
whatever offset was in use.
I thought this was a great feature for CW contesting. If it worked right, I
could keep hands off the rig 95% of the time.
I've checked with a few other TRLog/mp users who report the same symptoms.
I did determine that the mp does respond to RIT control commands from other
software packages, so I think the hardware is fine.
------------------------------------------------------------
Mark Shaum K9TR
email: k9tr@mtco.com
http://www.mtco.com/~k9tr
Central Illinois Grid EN50ii Zip 61721
------------------------------------------------------------
--
FAQ on WWW: http://www.contesting.com/trlogfaq.html
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|