The default address for the IC-756Pro is 92 base ten. The Icom manual gives
it in hexadecimal (5Ch, see page 72 of the Icom manual), TR wants base 10
for the address.
If you change the radio from the default address, then the new value needs
to be inserted in TR.
Chuck, KE4OAR (new 756Pro owner)
-----Original Message-----
From: Ralph T. Stetson III [mailto:kd1r@arrl.net]
Sent: Saturday, August 26, 2000 10:13 AM
To: trlog@contesting.com
Subject: [TRLog] IC756PRO address
Hello I am new to TR and have a new radio here that I am trying to set =
up with the program.
I am running into a bit of a problem as the suggested base 10 number of =
80 appears to be in conflict and locking up the program.
Then again that number is for the IC756 not the pro. Or so it would =
appear.
Many Thanks=20
Ralph T. Stetson III, KD1R
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
------------------------------------------------------------------------------
This e-mail is intended for the use of the addressee(s) only and may contain
privileged, confidential, or proprietary information that is exempt from
disclosure under law. If you have received this message in error, please
inform us promptly by reply e-mail, then delete the e-mail and destroy any
printed copy. Thank you.
==============================================================================
--
FAQ on WWW: http://www.contesting.com/FAQ/trlog
Submissions: trlog@contesting.com
Administrative requests: trlog-REQUEST@contesting.com
Problems: owner-trlog@contesting.com
Feature Wishlist: http://web.jzap.com/n6tr/trwish.html
|