Cal, I don't know about keying through the serial port, but CW works fine in
a DOS window under 98SE if you use parallel port keying. On my slow PC I've
found that you need to shut down background tasks to avoid some occasional
"slurring" of the CW though.
73, Pete N4ZR
----- Original Message -----
From: "Cal Kutemeier" <ckuter@ix.netcom.com>
To: <trlog@contesting.com>
Sent: Saturday, May 25, 2002 7:28 PM
Subject: [TRLog] Knwd 570 CW interface and config file
> Thanks to everyone who responded. there were 2 problems. 1) The
collector
> and base were touching in my cable. 2) It works only if I reboot W98 in
DOS
> mode, not with a MSDOS window within W98.
>
>
>
> _______________________________________________
> TRLog mailing list
> TRLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
|