Hi Ken,
I haven't tried this but I think it should work.
1. Program an F Key to send the A<>B command to the radio. (i.e. swap
VFOs)
2. Put this command in stdcfg.dat
3. When you want to QSY the B VFO
a. Hit the abovementioned F Key. This will swap the VFOs.
b. Type in the frequency and hit ENTER. The A (formerly B) VFO will
QSY as desired.
c. Hit the F Key again and, voila, A is back where it was and B is
where you want it.
Let me know if you need help with the F Key programming.
Hope this helps
73 de Jim Smith VE7FO
Ken Adams K5KA wrote:
> A question for the collective:
>
> Is there a method to type in a frequency and have the sub
> VFO on a FT1000MP go to that frequency, but NOT activate
> the transmit light? ie; send the sub VFO to a freq, but
> DO NOT go into split mode.
>
> Ken K5KA
>
> _______________________________________________
> TRLog mailing list
> TRLog@contesting.com
> http://lists.contesting.com/mailman/listinfo/trlog
>
|