On Mon, 19 Sep 2022 19:42:37 +0000
George Fremin III <geoiii@kkn.net> wrote:
> On Mon, Sep 19, 2022 at 12:37:16PM -0700, Kevin Schmidt wrote:
> >
> > Alternatively, I think it should also work if you use the built in
> > icom rig control:
> >
> > radio one baud rate = 115200
> > radio one control port = serial /dev/ttyUSB0
> > radio one receiver address = 148
> >
>
> Yes - this should work.
>
> I used the progam with some 7851 radios in 2017 with something like:
>
> Radio One Type = IC781
> Radio One Baud Rate = 19200
> Radio One Receiver Address = 38
> Radio One Control Port = serial /dev/ttyUSB0
>
> Need to make sure the receiver address and baud rate and port are
> correct.
>
>
Thanks.
Now to get trlog working. I keep getting this Error: Command not found.
Followed the PDF, trlog is executable. I'm missing something somewhere.
Ed
_______________________________________________
Trlog mailing list
Trlog@contesting.com
http://lists.contesting.com/mailman/listinfo/trlog
|