TenTec
[Top] [All Lists]

[TenTec] Scout/Argo QSK

To: <tentec@contesting.com>
Subject: [TenTec] Scout/Argo QSK
From: v31ry@ix.netcom.com (AE0Q V31RY)
Date: Fri, 29 Aug 1997 12:33:23 -0600
  Per the info that Grant K7GT received fron Ten Tec, I've changed R37 in my
Argo-556.

K7GT wrote:
>I just called TT service. The fix is to change a resistor, R37 , now 1k  to
>a 2.2k,  on the RCVR/Control board, 81644.  I will not likely do it for a 
>while, so would like to know what the new apparent upper qsk limit becomes
>after the fix.

  The limit that I can hear the band between code elements is now 50 wpm,
+/- a couple of wpm.  The measured value is 2.25k.  R37 is mounted on the
board vertically, so I cut the looped-over lead and soldered in a 1.2k
resistor in series with the cut lead on the 1k part.  Keying still sounds
good on another receiver.

  There are no component markings on the PC board in my radio, but R37 is
just to the front of the diode (also mounted vertically) that is almost
touching the right-front corner of connector 'A'.  The front of the radio is
facing forward.

73  --  Glenn
---------------------------
 Another month ends...   All targets met, all systems 
 working, all customers satisfied, all staff eager and
 enthusiastic.    All pigs fed and ready to fly.

     AE0Q / V31RY           ex: GM5BKC, ZB2WZ, SV0WY, WA0VPK
  v31ry@ix.netcom.com    --SOWP 5558-M, QCWA LM, ARRL LM, NCVA--
http://www.qsl.net/ae0q


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] Scout/Argo QSK, AE0Q V31RY <=