As many of you are aware, Ten-Tec has been enjoying quite a bit
of growth over the last few years. We have the following positions
available at present. Please mail or fax resume to Ten-Tec, Inc.,
1185 Dolly Parton Pky, Sevierville, TN 37862 or visit us at the
Dayton Hamvention, May 15-17 at booths 548-551.
Fax (423) 428-4483. Please do not respond by e-mail.
FIRMWARE/EMBEDDED SYSTEMS ENGINEER
Responsible for every aspect from board layout to creating and
supporting firmware, DSP experience a plus.
RF DESIGN ENGINEER
5 to 7 years experience designing 1-1000 MHz systems for competitive
commerical markets. Background in PLL, DDS development needed.
ENGINEERING TECHNICIAN
2 to 5 years experience doing CAD PC layout of analog and digital
circuits, prototype construction, performance testing, test fixture
design.
PRODUCTION TECHNICIAN
Both board and system level test and alignment. Defect repair to
component level in both analog and digital circuits. 2 to 5 years
experience required.
SERVICE TECHNICIAN
Component level repair on broad range of HF products, both analog
and microprocessor based. Experience with 500-1500 watt amplifiers
a plus.
Salaries negotiable and commensurate with experience.
73,
Scott E. Robbins, W4PA
Amateur Radio Product Manager, Ten-Tec, Inc.
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|