Repeating an earlier communication: A possibility could be having your power
supply in close proximity to the radio. Under no circumstances place it near
to the right side if the rig. I also had the same problem. Ten Tec suggested
I move the power supply and it worked. The problem being cases made of a non
ferrous material allowing flux lined from the Power transformer to interfere
with the proper operation of certain sensitive IC's.......de joe AKA
kf5mc
Mark Michel wrote:
> "Warble" may not be the best word, but I just acquired an Omni V and when
> tuning stations on cw there is a touch of "warble" or instability. Any
> suggestions? 73, Mark w9op@athenet.net
>
> --
> FAQ on WWW: http://www.contesting.com/tentecfaq.htm
> Submissions: tentec@contesting.com
> Administrative requests: tentec-REQUEST@contesting.com
> Problems: owner-tentec@contesting.com
> Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|