Perfectly normal, Clark.
As the oscillator comes up, it is then pulled onto
the operating frequency by the lock voltage applied.
If it is a bother, you can pull the oscillator by the trimmers
until it no longer does it. (You've then tweaked the
oscillator to run on the same frequency that the
PLL is going to lock it to.)
de KL7HF
-----Original Message-----
From: Clark Savage Turner WA3JPG <turner@safety.ics.uci.edu>
To: tentec@contesting.com <tentec@contesting.com>
To: <tentec@contesting.com>
Date: Friday, August 14, 1998 8:10 PM
Subject: [TenTec] OMNI VI frequency blip on 30 meters
>
>Hello All:
>
>On my second OMNI VI, this one upgraded and making me very happy.
>
>Both of my OMNI VI's exhibited a quick correction of frequency
>(a quick slide of about 100 Hz in about one or two seconds)
>as soon as I push the 30 meter button to get WWV or the 30 meter
>ham band. It does not do it hence. I had always considered it
>to be normal, but this series of questions got me to thinking,
>is it really normal?
>
>So, a general question, all of you OMNI VI owners notice one
>quick frequency shift if you go from say 40 meters to 30 meters
>WWV?
>
>Clark
>WA3JPG
>
>--
>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>Submissions: tentec@contesting.com
>Administrative requests: tentec-REQUEST@contesting.com
>Problems: owner-tentec@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|