Hi Terry:
I use CT with mine all of the time. First thing to
look at is the cable. Make sure it is a straight thru
job, not a "Null-Modem" cable. ( 1 to 1, 2 to 2. etc.)
Then, the address of the device should be checked to
assure it is the generic number (Not at home and
can't remember what it is, but it's in the manual).
Also, baud rate, I use 19,200.
Then, in the menu, set the item for the Omni to
report continuously to the port.
That done, it should work fine.
CT 8 and above works fine with mine. However,
TR-Log doe not. Haven't spent any time to run that
down yet.
Let me know if you still have trouble, Terry and l'll get
into the manual with you.
73, Del - KL7HF
-----Original Message-----
From: Karen Whall/Terry Burkholder <np3g@coqui.net>
To: TenTec@contesting.com <TenTec@contesting.com>
To: <tentec@contesting.com>
Date: Sunday, August 16, 1998 9:55 AM
Subject: [TenTec] Interfacing the Omni VI to CT
>
>I have a new Omni VI+ and so far have been unable to get it to talk to CT.
>I do have it talking to my DXbase logging program OK. Any suggestions? I
>have loaded the TSR for the proper comm port and selected the Omni VI from
>the radio menu in CT and set the baud rate and comm port in CT. What have
I
>missed?
>
>Thanks much,
>
>Terry NP3G
>
>Terry A. Burkholder NP3G FOC 1397
>
>Karen E. Whall NP3F FOC 1671
>
>P. O. Box 220, Ceiba, PR 00735, np3g@coqui.net 787-885-5713
>
>
>--
>FAQ on WWW: http://www.contesting.com/tentecfaq.htm
>Submissions: tentec@contesting.com
>Administrative requests: tentec-REQUEST@contesting.com
>Problems: owner-tentec@contesting.com
>Search: http://www.contesting.com/km9p/search.htm
>
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|