For sale or swap:
-Two large spools of enameled solid copper magnet wire, #26 and #28.
-Each spool is 6.25 inches in diameter and 6.25 inches in length.
-Both are full within 3/8 inch of the edge. (i.e. they are 99% or more
full)
--- The #26 gage wire spool on my scale weighs 8.25 pounds, is red
enamel.
10,000 feet are on a full spool in a catalog and weighs 8 pounds. Full.
---The #28 gage wire spool weighs 10 pounds, is gold enamel. 15,000 feet
are
on a full spool which in the catalog weighs 8 pounds. Also Full.
---The wire is Elektrisola wire. Check out:
http://www.elektrisola.com/
---The red #26 is number P155 on the web page
---The gold #28 is number PN155 on the web page
---Both wires do not require stripping before soldering!!!!!
--- The insulation does strip easily with a knife without heat.
---The wires strip very easily if heated with a small soldering iron
first.
---Same or similar type of wire in Mouser, page 404 retails for $67.76
and $74.80 per spool.
Looking for a reasonable offer or swap maybe around TT CW
filter(s)...need more info?
Reply off reflector if you like at: k1opq@arrl.net
73 de Dave in NH
|