TenTec
[Top] [All Lists]

[TenTec] Argo Speech Processor Question (was Argo V distortion)

To: <tentec@contesting.com>
Subject: [TenTec] Argo Speech Processor Question (was Argo V distortion)
From: geraldj@isunet.net (Dr. Gerald N. Johnson, electrical engineer)
Date: Tue Aug 12 22:29:25 2003
I've had burned fingers during FD running the twinlead fed off center
fed diople on some bands.

Makes it less than my favorite.

73, Jerry, K0CQ

Tim Randa wrote:
> 
> I believe most "windoms" used today are basically off center fed dipoles
> with some sort of rf choke at the feed point. I've used one for years and
> have had good results.
> 
> de Tim  K?FL
> 
> ----- Original Message -----
> From: "Dr. Gerald N. Johnson, electrical engineer" <geraldj@isunet.net>
> To: <tentec@contesting.com>
> Sent: Tuesday, August 12, 2003 6:29 PM
> Subject: Re: [TenTec] Argo Speech Processor Question (was Argo V distortion)
> 
> > The ORIGINAL Windom was a single wire feeder, always with a tuner and
> > lots of RF in the shack.
> >
> > 73, Jerry, K0CQ
> > --
> > Entire content copyright Dr. Gerald N. Johnson, electrical engineer.
> > Reproduction by permission only.
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec

-- 
Entire content copyright Dr. Gerald N. Johnson, electrical engineer.
Reproduction by permission only.
<Prev in Thread] Current Thread [Next in Thread>