Hello,
at least in some cases I can confirm Sinisa's observations. A
sufficiently high AGC threshold (probably in combination with some hang
time) improved readability at least on some signals, f.ex. on 30m, which
is a horribly noisy band at my QTH. Tested it only a few times this
evening, got my ORION today....
73,
Ulrich DH0GHU
Sinisa Hristov wrote:
Carl Moreschi wrote:
I've tried this test many times. I do not hear the weak signal distortion
with an AGC decay time of 20db/sec and a hang time of 0.35 and a threshold
of 0.37 uv. These values work very well for me for ALL signals CW and SSB
signals.
Than can work to some degree, you are using hang time to reduce
the frequency of gain changes saving you from some of the distortion.
Perhaps you have a much better behaved noise than I have :-)
These setting used here clearly result in noise clipping,
not as severe as with zero hang time, but still present.
73,
Sinisa YT1NT, VA3TTN
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|