[TenTec] Corsair Freq. Shift.

["Bruce Lanning" <blanning@acadia.net>]

Can anyone help with my problem. My CORSAIR II, after warm-up will shift 
freq. down about 600 cycles. The problem seems to be in the double sideband 
generator board, as after the shift, the three adjustments to the 9.000 mhz 
xtal require realignment.
I have tried heat in this area with no conclusive results. I have also 
checked the 8.0 volt regulator voltage and it does not move.
If anyone has had this problem and corrected it, please let me know, I would 
be most grateful.
Bruce W1GBS at blanning@acadia.net