In the Omni VI Plus they are D2 and D3 on the Low Pass Filter board. Part #
is BAT41.
73
Bob, K4TAX
----- Original Message -----
From: "Mike Hyder -N4NT-" <n4nt_m_o_hyder@charter.net>
To: <gsm@mendelson.com>; "Discussion of Ten-Tec Equipment"
<tentec@contesting.com>
Sent: Monday, November 28, 2005 8:22 AM
Subject: Re: [TenTec] repairs
> The ones that generate the ALC voltage.
>
> ----- Original Message -----
> From: "Geoffrey S. Mendelson" <gsm@mendelson.com>
> To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
> Sent: Monday, November 28, 2005 9:15 AM
> Subject: Re: [TenTec] repairs
>
>
> On Mon, Nov 28, 2005 at 09:02:46AM -0500, Mike Hyder -N4NT- wrote:
>> I've had similar experiences (current jumping up all of a sudden because
>> of
>> self-oscillation) with the older Ten-Tec radios. In my case the trouble
>> was
>> caused by the rig's not producing ALC voltage because of bad diodes. I
>> called Garland and he said something like, "Yep, they can do that if the
>> diodes are bad." It cost me about $0.96 to make the repair.
>
> Would you please elaborate? There are lots of diodes in a rig, which
> ones did you replace?
>
> Thanks and 73,
>
> Geoff.
>
> --
> Geoffrey S. Mendelson, Jerusalem, Israel gsm@mendelson.com N3OWJ/4X1GM
> IL Voice: (07)-7424-1667 IL Fax: 972-2-648-1443 U.S. Voice:
> 1-215-821-1838
> You should have boycotted Google while you could, now Google supported
> BPL is in action. Time is running out on worldwide radio communication.
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|