TenTec
[Top] [All Lists]

[TenTec] Jupiter selectivity

To: tentec@contesting.com
Subject: [TenTec] Jupiter selectivity
From: "Rob Atkinson, K5UJ" <k5uj@hotmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 13 Dec 2005 17:35:26 +0000
List-post: <mailto:tentec@contesting.com>
<<<This power level is just about correct for driving a
Centurion to legal AM limit of 375 watts carrier.>>>

I'd never drive a centurion to 375 w. cxr on AM.  It is simply not up to 
that kind of duty.  It lacks the cooling and power supply robustness for 
that, and can barely handle an AM transmission of even just a few minutes at 
200 w. cxr.    Do a geezer transmission and you'll melt it down.   at the 
least, the fan should be changed to something that moves 3 or 4 times the 
volume of air over the stock quiet fan volume before AM is attempted at 200 
to 300 w., as the Centurion was intended to be a quiet desktop ham cw/ssb 
amp.  For rtty ten tec wants you to run no more than 600 or maybe it's 800 
w. and not for very long.   the combination of a carrier and two sidebands 
is asking a lot of this amp.  perhaps i am overly cautious.  if i run mine 
at 1 kw pep on 160 LSB for a  5 to 10 minute transmission the plates get 
bright orange and for that 1 kw i am darn near the 800 ma max for Ip.  
forget 1.2 kw on that band.

73,
rob / k5uj

_________________________________________________________________
Express yourself instantly with MSN Messenger! Download today - it's FREE! 
http://messenger.msn.click-url.com/go/onm00200471ave/direct/01/

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>