It doesn't seem to work on my Orion II either. However, there is some
kind of effect if you have BinRx on and then unplug the headphones and
then plug them back in. Some times this will cause a strobing affect
between the headphones and you seem to be able to control the volume of
one of the headsets ear pieces with the sub af and the other with the
main af controls. I am not quite sure why. I have checked the
headphones on a stereo and they work there.
Dale A. Barrett
WB7D - Murray Kentucky
Dick Green WC1M wrote:
> Grant,
>
> I take it you mean an Orion I running V2. Are you saying that you hear lower
> pitched signals more in the left headphone and higher pitched signals more
> in the right? As you tune across a signal up the band, it moves left to
> right? That's what I hear in V1, but not in V2.
>
> 73, Dick WC1M
>
>
>> -----Original Message-----
>> From: Grant Youngman [mailto:nq5t@comcast.net]
>> Sent: Monday, September 11, 2006 5:07 PM
>> To: 'Discussion of Ten-Tec Equipment'
>> Subject: Re: [TenTec] 2.059d: BinRx still broken
>>
>>
>>> As in previous V2 releases, BinRx doesn't work in 2.059d.
>>>
>> It changes
>>
>>> the audio, producing a sort of "surround sound"
>>> effect, but doesn't create any spatial differentiation between CW
>>> signals of different pitch.
>>>
>> I just checked it on my Orion v2 very carefully and it seems
>> to be working fine. So not sure what you might be experiencing.
>>
>> Grant/NQ5T
>>
>>
>>
>>
>>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|