John, I bought the TT model 305 level converter for $50 bucks on the big
auction place on net. The cable goes from back of Omni 6, the 1/8 mini plug
extreme right middle. Also RCA plug from 13.8 plug also on back, to power the
converter. Then the converter has a DB24 serial to puter port. Works great. I
use WIN-EQF logging and ham Radio Delux softeware. The latter is free. HRD has
Psk also. But I do understand the DB25 on back can be used to computer. I have
remote tuning knob, Model 301, into my DB25 on back. On page 3-11 of manual It
says to use standard serial to connect to computer. Omni 5 has pins reversed.
Hope I helped. Gud luck. Roger W4IV
---------- Original Message ----------------------------------
From: john.brewer@us.schneider-electric.com
Reply-To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 9 Nov 2006 15:35:57 -0500
>The info in the manual on how to interconnect the Omni VI is not clear to me.
>Do I need to
>switch Rxdata and Txdata on the cable used from the Omni to the computer, or
>do I use a
>straight serial cable (Rxdata to Rxdata, Txdata to Txdata)?
>
>Trying to run Logger32 with the Omni and Paragon (it's already working with my
>K2)
>
>Thanks!
>John K5MO
>
>_______________________________________________
>TenTec mailing list
>TenTec@contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|