[TenTec] Classic Orion optional filters, need suggestion

[<k8vf_mark@centurytel.net>]

One work around is to purchase the INRAD #762 filter and place it in the 
1000Hz slot(removing the 1000Hz filter, of course).
On mine with V2 firmware, the 600 Hz filter will then come on at 
1000Hz.......still allowing the DSP to operate also.
It works well.  If you decide you dont like it there, put it in the 500Hz 
slot and use firmware to "center" it properly. It will then come on at 500 
Hz , or you can choose to leave it off till you need it, or turn it on at 
any time.

On mine, I put the 1000Hz filter in the 1800Hz slot, Inrad 600Hz in the 
1000Hz slot.
Works well for me.

Good luck.