TenTec
[Top] [All Lists]

Re: [TenTec] Orion II A9 Board Failure...Again!

To: <tentec@contesting.com>
Subject: Re: [TenTec] Orion II A9 Board Failure...Again!
From: "Speer, Doug" <Doug.Speer@FairbanksMorse.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 26 Jun 2008 11:21:08 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
 Message: 1
Date: Wed, 25 Jun 2008 19:08:49 +0300
From: "Geoffrey S. Mendelson" <gsm@mendelson.com>
Subject: Re: [TenTec] Orion II A9 Board Failure...Again!
To: geraldj@storm.weather.net,  Discussion of Ten-Tec Equipment
        <tentec@contesting.com>
Message-ID: <20080625160849.GA15020@cable.mendelson.com>
Content-Type: text/plain; charset=us-ascii

If the low quality Chinese electrolytic capacitors are a well known
problem in the electronics industry, my question is has Ten-Tec done
anything about it for late s/n production?  I purchased a new Orion 2
within the past couple of months which represents a significant
expenditure for my ham radio hobby budget.  I would hate to think I
purchased anything less than top shelf quality.  So maybe my question is
one for Ten-Tec directly but has Ten-Tec procurement changed how they
specify and buy components for production and / or service parts to
insure they (we) are getting top quality components?


Doug, W9PN 
 
 

-----Original Message-----


----------------------------------------------------------------------

Message: 1
Date: Wed, 25 Jun 2008 19:08:49 +0300
From: "Geoffrey S. Mendelson" <gsm@mendelson.com>
Subject: Re: [TenTec] Orion II A9 Board Failure...Again!
To: geraldj@storm.weather.net,  Discussion of Ten-Tec Equipment
        <tentec@contesting.com>
Message-ID: <20080625160849.GA15020@cable.mendelson.com>
Content-Type: text/plain; charset=us-ascii

On Wed, Jun 25, 2008 at 09:23:01AM -0600, Dr. Gerald N. Johnson wrote:
> Lots of lowest bid Chinese electrolytics are poorer when new than I
find
> acceptable, so they age poorly. A few years ago there was a large
batch
> of capacitors often applied to computer motherboards that exploded
when
> power was applied for the first time. My guess is that the factory
> didn't understand the formation process and hadn't finishing making
the
> electrolytics.

This was very well documented in the press. A Tiwanese engineer worked
for a Japanese manufacturer of electrolytics. He stole the formula for
the electrolyte (the liquid inside the capacitors). His employers knew
what he was doing and gave him access to an incomplete formula. 

It worked perfectly in new capacitors but as it aged the capacitors
failed.

His Tiawanese employers underbid everyone on the market and the world 
was flooded with products that eventually failed when their capacitors 
exploded.

Geoff.
-- 
Geoffrey S. Mendelson, Jerusalem, Israel gsm@mendelson.com  N3OWJ/4X1GM


------------------------------


----------Legal Disclaimer----------

The information contained in this message may be privileged and confidential, 
and is intended solely for the use of the named addressee.  No other person is 
authorized to access, copy or re-use this message (or any information contained 
herein).  If you are not the intended recipient, please notify us immediately 
by replying to this message and delete it from your computer.


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>