Steve,
Thanks for your offer. I am using the Accessory cable and I built a
quick and dirty interface to drop down the speaker output from my
laptop to feed the line input on the Jupiter. The sound input on my
laptop is happy with the line out from the Jupiter. My Thinkpad, which
crashed and burned, had line in and out so life was simple then. But the
HP is not as cooperative. Vox works on the HP but I think I will be
better served with PTT, so I am gathering parts for an interface that
will pull DTR & RTS out the usb/serial line for PTT control. Having
that switched accessory jack is great!.It does make life easy.
John / WA1JG
STEVEN KLINE wrot
>
> No, you do not necessarily need to buy an adjunct interface in order to
> operate HF digital modes with the ORION II, if you don't mind doing a little
> bit of work. I operate both PSK31 and FSK RTTY with no adjunct or 3rd party
> interface unit. I utilize the ORION AUX I/O jack, 8 pin DIN receptacle on
> the back of the OII, my computer sound card, and serial port. The AUX I/O
> port provides easy access to the audio input and output required to
> interface a computer sound card as well as push-to-talk, and several other
> functions. To free up my serial port I use a USB port for radio control
> thereby never have to get up and switch cables when operating different
> modes while still maintaining radio control with my software.
>
> You would have received with your radio (when ordered new) an accessory DIN
> cable that connects to the AUX I/O port on the back of the radio. The other
> end of this cable consists of color coded wires terminated with an RCA
> connector (female). For FSK RTTY operation I use a simple mod of this
> cable, made by bringing out one additional wire from the back of the AUX I/O
> DIN plug (pin #7) FSK. It is not difficult to integrate this wire into the
> existing cable provided by TEN TEC and is only required if you desire to run
> FSK verses AFSK (for RTTY). Several years back a modified cable was being
> built and sold by K5SF, Richard Detweiler, for those who did not want or
> feel capable of adding the auxiliary wire for RTTY FSK operation themselves.
> It really is a very simple task to add this wire for FSK operation. Or, you
> could elect to use AFSK which would not require this connection/wire from
> the ORION AUX I/O port. My personal preference was to operate with FSK.
> You might drop Rich a note and ask him if he has any left over that he
> didn't sell, he might part with one, or perhaps another member of the
> reflector has one which they no longer require.
>
> If you decide to go this route and don't mind a little bit of work feel free
> to send me a note and I'll provide you (off net) with a more detailed
> description of the configuration I am using.
>
> Page 27/28 of the OII Operating Manual, provides additional detail and
> description for the AUX I/O port.
>
> Good Luck
> Steve - W5JK
>
> -----Original Message-----
> From: tentec-bounces@contesting.com [mailto:tentec-bounces@contesting.com]
> On Behalf Of John Molenda
> Sent: Thursday, January 21, 2010 11:59 AM
> To: Discussion of Ten-Tec Equipment
> Subject: [TenTec] digital
>
> Hello all, I have a Orion II and would like to run psk31 , rtty etc. My
> radio is connected to my computer only by the cabling used to up grade the
> software via the internet . Do I need to buy some other interface to utilize
> the HF digital modes ? thanks John kb2huk
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 9.0.730 / Virus Database: 271.1.1/2636 - Release Date: 01/21/10
> 02:34:00
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|