pfizenmayer skrev:
Was playing with trying to record the Orion 566 audio output using the
"LINE OUTPUT" fed into my laptop LINE IN (or microphone input too ). Tried
all 3 level settings for line out - and tried setting it for just MAIN or
SUB or BOTH. But I am getting a digital pulsing "noise" about every sec
that seems to be some sort of polling riding on the audio.
Have not tried a isolation xformer yet just direcdt wired with shielded
cable.
Any ideas/comments from Orion users ?
Thanks _ Hank K7HP
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
Be aware that there's a 5V DC component on the LineOut pin, which you'll
need to block (use a 400nF cap or greater), this is an undocumented
"feature" of both the 565 and 566 Orions - confirmed by TT-technical
dep. but not published by them, which is a shame, many users have been
thrown by this.
--
Vy 73 de OZ1PIF/5Q2M, Peter
*****************************************
** Genius is one per cent inspiration, **
** and ninety-nine per cent **
** perspiration. **
** -- Thomas A. Edison **
*****************************************
email: peter(no-spam filler)@frenning.dk
http://www.frenning.dk/oz1pif.htm
Ph. +45 4619 3239
Snailmail:
Peter Frenning
Ternevej 23
DK-4130 Viby Sj.
Denmark
*****************************************
|