It is interesting how a simple fix for these problems doesn't seem to be
well known.
I submitted the article draft to QST, and it was questioned by the Technical
Review folks, and although I have been published in QST before, they could
not see how this would "transform" the apparent input SWR.
I have received hundreds of emails on how this technique worked for radio
amateurs all over the world.
73,
Mike
W2AJI
--------------------------------------------------
From: "Jim Brown K9YC" <k9yc@audiosystemsgroup.com>
Sent: Monday, May 31, 2010 3:34 PM
To: "Discussion of Ten-Tec Equipment " <tentec@contesting.com>
Subject: Re: [TenTec] Ten-Tec 411 Centaur Amp Problem
On Sat, 29 May 2010 18:34:37 +0000, Mike Schatzberg wrote:
Yes, the article mentions the use of the line isolator which is indeed
nothing more than a hunk of ferrite slid over a piece of coax.
It was the length of coax that "helped."
73,
Jim K9YC
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|