Why? What advantage is there to slot or phillips head? Seems like
more trouble prone than hex.
It's a good idea to have one of those telescoping wand things that has
a magnet on the end. You'll need it if you drop one of the hex
screws.
rob
k5uj
<<<I would forget adjusting the bearings. I replaced mine about 4 years ago -
TT picked up the tab. I priced the fan a few years ago and priced out at
$40 including shipping.
The fan is a pita to replace. My fan was secured with allen bolts. I should
have replaced them with slotted or phillips head bolts.>>>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|