It could have been worse....you could have hooked up a linearfrom
another station to the antenna input on the OII, and tested that radio
out..
That woud hurt!
3,
Lee
-----Original Message-----
From: Carl Winkles <jcwinks@att.net>
To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Sent: Sat, Mar 12, 2011 7:33 pm
Subject: Re: [TenTec] Do not do what I did.
Thanks for the warning but that's one of many mistakes I already made.
I was
moving some things around and the PTT switch on the regal mic got
pushed up into
the talk position. It was connected to a 6N2 and when I turned it on
the rig
came up in transmit. Many thanks to Gary Green at Ten-Tec for gently
explaining
my error.
Carl, K4SEV
--- On Sat, 3/12/11, george fritkin <georgefritkin@yahoo.com> wrote:
From: george fritkin <georgefritkin@yahoo.com>
Subject: Re: [TenTec] Do not do what I did.
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Date: Saturday, March 12, 2011, 5:01 PM
I re-configured my station. I added some new gear and when you have 18
operating positions all with linears it is a major task. One position
has an
ORION ll. When checking all positions I discovered a problem with the
ORION ll.
It would power up ok and I heard RX noise but not stations. Checked
all bands
nothing. I used another radio in the shack, but ORION could not hear
the radio
next to it! Well, before boxing it up I thought I would give the
transmit a try.
When I grabbed the push to talk button on the mic I found the PTT
switch was
now. I pushed it off, but still nothing no signals just noise. Well,
I figured
I would cycle the power and when I did the ORION was back to life! How
the PTT
was on I do not know. I just thought I would pass this along.
George, W6GF
________________________________
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|