TenTec
[Top] [All Lists]

Re: [TenTec] paralleling power supplies to run Herc II

To: tentec@contesting.com
Subject: Re: [TenTec] paralleling power supplies to run Herc II
From: Jim Brown <k9yc@audiosystemsgroup.com>
Reply-to: k9yc@arrl.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 21 Jun 2011 08:40:19 -0700
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
On 6/21/2011 7:09 AM, Carl Winkles wrote:
> I have used one of those capacitors for Field Day using a 100 watt rig and a 
> battery with a battery booster. It seems to work although I don't know how to 
> test it

The battery makes the capacitor un-necessary as long as the leads 
between the battery and the rig are short and fat  -- the battery itself 
acts as a big capacitor. The capacitor could improve things ONLY if it 
were connected with near zero-length leads to the DC terminals of the 
rig, and even then the benefit would be QUITE minimal.

Ohm's Law is a wonderful thing -- big, short copper is your friend, and 
a LOT cheaper than exotic capacitors.

73, Jim K9YC
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>