Both excellent ideas! I briefly thought about doing something like
that, but (horrors!) there were no dummy loads to be had on site and
I didn't want to go back home (again) to grab mine. I honestly never
thought of putting the Corcom filter on the Yaesu rig. I have
several, so maybe I should have lashed up two of them.
So, I decided to learn to live with the mystery and enjoy using the UPS.
Kim (an OM, not a YL) N5OP
At 07:28 AM 6/26/2012, Al Gulseth wrote:
>Kim,
>
>"Hindsight" here - the definitive answer would have probably come if
>you could
>have briefly switched the '1000D over to a dummy load. That might help
>determine if the issue came from the RF or the PS/AC distribution side. (Bear
>in mind that both HF RF and power supply switching hash frequencies can
>propagate via an AC power system, as BPL and the new "smart meter" systems
>prove.)
>
>The other thing that would have been interesting to try would have
>been to put
>the Corcom filter on the '1000D instead of your rig to see if that made any
>difference.
>
>73, Al
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|