Hello Everyone
I need some help repairing a Paragon 585
It has full output on 40 meters (100 w)...all the other bands range from
3 watts to 25 watts
The RF voltage from the 2nd mixer board is roughly the same on all bands
as measured with a Heath VTVM and RF probe
I've checked continuity on the low pass filter board and all seems OK as
I cycle thru the bands.....board removed and checked the continuity of
the coils. No relays seem to be shorted open or closed.
Maybe a better testing method of the low pass filter board ???
Receive seems fine on ALL bands...shortwave, ham, everything
Thanks in advance guys
Lee
--
Bryan Lee Cornwell
blcornwell@k2blc.com
http://k2blc.com
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|