A mod would be needed since the Orion does not have receive loop
connections. This is exactly the mod that is done to the Omni VII by
adding the two wires from Tentec. But Tentec did not put in these
connections for either of the Orion's.
Carl Moreschi N4PY
58 Hogwood Rd
Louisburg, NC 27549
www.n4py.com
On 4/6/2014 9:32 PM, Toby Pennington wrote:
I would like to connect an ANC 4 Noise Unit into the receive only path
of the Orion 2 in order to bypass having to deal with the TX/RX relay in
the noise unit.
I know other rigs have this capability built in (such as the Icoms and
the K3, maybe others) where you can easily patch the noise unit into the
receive line without worrying about the noise canceller T/R relay
switching giving you problems.
Does anyone know of a way to do this on the Orion with existing outlets
on the back of the Orion 2, or would it entail a mod of some kind.
Thanks for any help!
Toby K4NH
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|