> From: Rick@DJ0IP.de
> To: tentec@contesting.com
> Date: Sun, 22 Nov 2015 22:19:43 +0100
> Subject: Re: [TenTec] TenTec Digest, Vol 155, Issue 28
>
> Noise blankers come in two flavors:
> 1) Hardware noise blankers
> 2) Software (DSP) noise blankers
>
> The older radios (OM6 and earlier) all had hardware blankers.
> So does the Eagle.
> The Omni VII and Orion have DSP noise blankers.
>
> It is my understanding that the software blanker can potentially be
> implemented to work as well as the old hardware blankers, but in most
> radios, most of the OEMs did not do a good enough job of implementing it.
> I believe all of the Japanese OEMs and even Ten-Tec and Elecraft got it
> wrong, initially.
>
> It was Rob (again) whose persistence in flagging this issue to the two
> American vendors, got them to re-think their NB and fix it. I believe it
> was similar with FLEX but as I said, I'm getting old and don't recall if Rob
> was involved there or not. I think he said he told Gerald.
>
> Unfortunately the Japanese OEMs don't listen to Rob as much as our US OEMs
> do.
> They don't seem to want to listen to anyone in the field.
> It took Yaesu nearly 10 years to implement W8JI's $3 fix to their CW keying
> issue that Bob was referring to.
> Their FT-1000s polluted our ham bands for 10 years. Eventually most of the
> ones in the field got updated (privately), not by Yaesu.
>
> It will be a tragedy if Ten-Tec goes under. They have had an excellent
> track record of listening to field input.
>
> 73 - Rick, DJ0IP
> (Nr. Frankfurt, Germany)
>
>
>
> -----Original Message-----
> From: TenTec [mailto:tentec-bounces@contesting.com] On Behalf Of wes Bolin
> Sent: Sunday, November 22, 2015 7:59 PM
> To: tentec@contesting.com
> Subject: Re: [TenTec] TenTec Digest, Vol 155, Issue 28
>
> REF: Noise and noise blankers
>
> I have a Triton IV with the noise blanker. It takes out pulse noise and
> also eliminated static electricity noise from my vertical antenna during
> stormy weather last week.
>
> For atmospheric noise, and a neighbor's TV set noise, I use the ANC-4 Noise
> Reducer by Timewave. It was recommended to me by another TenTec owner and
> it works great (I have a small outside antenna to pick up noise). I have
> had many QSOs with the ANC-4 "on" that I would not have been able to without
> it.
>
> Hope my experience will help others with similar problems.
> Wes
>
> On Sun, Nov 22, 2015 at 11:00 AM, <tentec-request@contesting.com> wrote:
>
> > Send TenTec mailing list submissions to
> > tentec@contesting.com
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> > http://lists.contesting.com/mailman/listinfo/tentec
> > or, via email, send a message with subject or body 'help' to
> > tentec-request@contesting.com
> >
> > You can reach the person managing the list at
> > tentec-owner@contesting.com
> >
> > When replying, please edit your Subject line so it is more specific
> > than "Re: Contents of TenTec digest..."
> >
> >
> > Today's Topics:
> >
> > 1. Omni VI noise blanker (John King)
> > 2. Re: Omni VI noise blanker (Carl Moreschi)
> > 3. Re: Omni VI noise blanker (Richard Gerardi)
> > 4. Omni VI noise blanker (John King)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Sun, 22 Nov 2015 15:50:53 +0000 (UTC)
> > From: John King <k5pgw@yahoo.com>
> > To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
> > Cc: "k5pgw@yahoo.com" <k5pgw@yahoo.com>
> > Subject: [TenTec] Omni VI noise blanker
> > Message-ID:
> >
> > <700169200.8821394.1448207453957.JavaMail.yahoo@mail.yahoo.com>
> > Content-Type: text/plain; charset=UTF-8
> >
> > I need to communicate with someone with experience with the Ten Tec
> > Omni Vi noise blanker. I push the button and rotate the pot with NO
> > apparent change in sound. I am convinced that the noise blanker is not
> working.
> > Let's us discuss. 73, K5PGW
> >
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Sun, 22 Nov 2015 11:08:54 -0500
> > From: Carl Moreschi <n4py3@earthlink.net>
> > To: John King <k5pgw@yahoo.com>, Discussion of Ten-Tec Equipment
> > <tentec@contesting.com>
> > Subject: Re: [TenTec] Omni VI noise blanker
> > Message-ID: <5651E896.6070003@earthlink.net>
> > Content-Type: text/plain; charset=ISO-8859-1; format=flowed
> >
> > Depending on what type of noise, this can easily be normal. Noise
> > blankers only work on pulse noise like from an electric motor or
> > electric fence.
> >
> > Carl Moreschi N4PY
> > 58 Hogwood Rd
> > Louisburg, NC 27549
> > www.n4py.com
> >
> > On 11/22/2015 10:50 AM, John King via TenTec wrote:
> > > I need to communicate with someone with experience with the Ten Tec
> > > Omni
> > Vi noise blanker. I push the button and rotate the pot with NO
> > apparent change in sound. I am convinced that the noise blanker is not
> working.
> > Let's us discuss. 73, K5PGW
> > > _______________________________________________
> > > TenTec mailing list
> > > TenTec@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/tentec
> > >
> >
> >
> > ------------------------------
> >
> > Message: 3
> > Date: Sun, 22 Nov 2015 08:16:35 -0800
> > From: Richard Gerardi <qdot22@gmail.com>
> > To: n4py3@earthlink.net, Discussion of Ten-Tec Equipment
> > <tentec@contesting.com>
> > Cc: John King <k5pgw@yahoo.com>
> > Subject: Re: [TenTec] Omni VI noise blanker
> > Message-ID:
> > <CAL8fztszU09BGDOjqfStPU=
> > 9tyvGGeV2ZzybkCTNPOTM934MMA@mail.gmail.com>
> > Content-Type: text/plain; charset=UTF-8
> >
> > There is no Noise Blanker button for the Omni VI. Just engage the
> > feature more or less using the pot. If your pushing the button to the
> > left of the NB/SQL your attenuating -20dB.
> >
> > Regards
> >
> > Rich
> > AA6VX
> >
> > On Sun, Nov 22, 2015 at 8:08 AM, Carl Moreschi <n4py3@earthlink.net>
> > wrote:
> >
> > > Depending on what type of noise, this can easily be normal. Noise
> > > blankers only work on pulse noise like from an electric motor or
> > > electric fence.
> > >
> > > Carl Moreschi N4PY
> > > 58 Hogwood Rd
> > > Louisburg, NC 27549
> > > www.n4py.com
> > >
> > >
> > > On 11/22/2015 10:50 AM, John King via TenTec wrote:
> > >
> > >> I need to communicate with someone with experience with the Ten Tec
> > >> Omni Vi noise blanker. I push the button and rotate the pot with NO
> > >> apparent change in sound. I am convinced that the noise blanker is not
> working.
> > >> Let's us discuss. 73, K5PGW
> > >> _______________________________________________
> > >> TenTec mailing list
> > >> TenTec@contesting.com
> > >> http://lists.contesting.com/mailman/listinfo/tentec
> > >>
> > >> _______________________________________________
> > > TenTec mailing list
> > > TenTec@contesting.com
> > > http://lists.contesting.com/mailman/listinfo/tentec
> > >
> >
> >
> >
> > --
> > Richard Gerardi, AA6VX
> > North Santa Barbara County ARES
> > Satellite Amateur Radio Club, W6AB
> > aa6vx@arrl.net
> >
> >
> > ------------------------------
> >
> > Message: 4
> > Date: Sun, 22 Nov 2015 16:42:36 +0000 (UTC)
> > From: John King <k5pgw@yahoo.com>
> > To: "tentec@contesting.com" <tentec@contesting.com>
> > Subject: [TenTec] Omni VI noise blanker
> > Message-ID:
> >
> > <794950317.8823983.1448210556684.JavaMail.yahoo@mail.yahoo.com>
> > Content-Type: text/plain; charset=UTF-8
> >
> > ?Thanks Carl and Richie. ? I went to the shack and turned the Omni VI
> > on and low and behold there was some impulse noise that sounds like an
> > arc or electrical fence or sign and the blanker worked when advanced to
> the right.
> > It does not attenuate the 75 meter band noise or rapid line noise
> > which is the S5 to S7 ambient noise there this morning. I think it is
> > working on less rapid impulse noise. I will try the NR DSP button and
> > see if that helps..
> > I have had this WONDEFUL Omni VI over 20 years and like it more
> > everyday as compared to my three Icoms and Kenwood TS 2000. It is such
> > an uncomplicated outstanding piece of gear. Its' simplicity and
> > outstanding receiver are the greatest. I think I want another one. 73,
> John, K5PGW? ?
> >
> >
> > ------------------------------
> >
> > Subject: Digest Footer
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> >
> > ------------------------------
> >
> > End of TenTec Digest, Vol 155, Issue 28
> > ***************************************
> >
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|