Yes, you are correct ans that should be fine.
Carl Moreschi N4PY
58 Hogwood Rd
Louisburg, NC 27549
www.n4py.com
On 2/17/2018 3:48 PM, Michael Marx wrote:
Hi Guys,
I have an Orion 1 with Keying Loop 1 that is not functional. Keying loop 2 is
ok. So, one option is I can use antenna 2 with keying loop 2. I am using the
Orion 1 with a Centurion. If I connect the AMP KEY to the PTT jack on the
Centurion, it still will work full QSK with the QSK/PTT switch in the PTT
position. According to the Orion manual, when using the amp key jack, RF is
delayed by 15 ms, so I should be ok with relay time sequencing should't I?
Another friend has an FT-1000 he wants to use with a Centurion. There is no
keying loop, so one of the solutions is to use the ptt input. Like the Orion,
you can adjust it so the the RF does not appear for 15 ms, so I'm thinking it
would work ok that way as well? I just don't to fry the relays in the
Centurion.
73
Mike WB0SND
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|