Ernie,
The N1MM recommended port setting for the Orion II are 57600, 8, N, 1 and
DTR/RTS: handshake, handshake.
What chip set is there in the usb/serial converter? You want one with an FTDI
chipset.
73, Ted W4NZ
-----Original Message-----
From: TenTec [mailto:tentec-bounces+w4nz=comcast.net@contesting.com] On Behalf
Of Ernie Popp
Sent: Tuesday, March 7, 2023 10:22 AM
To: tentec@contesting.com
Subject: [TenTec] Orion II rig control problem
I have an O II that has worked great for years with DX4WIN. I recently
had to reload it and now i cant get it to work. The same setup works
with N1MM logger. I'm using the same settings in both soft wares.
baud 57600
bits 8
stop bits 1
polling 5000
max tries 6
dtr on
rts off
The Orion_x driver does not work at all while the Orion driver seems
slow and will not change modes. I'm using a serial to usb converter
cable. Anybody have any ideas?
73, Ernie K2EP
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|