Javier,
I have not seen any mods for a Henry amplifier to 160 meters. If you can
find an SB-220, it is much easier to make it a single band amplifier for
160, and there are articles on how to make the conversion from 80 to 160
meters and use higher bands.
I believe it is a lot easier than trying to rework the Henry, which I would
not do.
Most Henry amps have a roller inductor and fixed tuning capacitors in the
plate tank circuit, and one would have to add fixed inductance for 160 as
well as add padding capacitors to the existing capacitor.
Just my personal opinion.
73 es Buena Suerte
George
----- Original Message -----
From: "Javier Remoto" <jlopez@plasticosomega.com>
To: <topband@contesting.com>
Sent: Saturday, July 17, 2004 2:49 PM
Subject: Topband: Henry 3K-A 160 mts Band?
> Hi,
>
> I would like to know if any member of this list had make a 160 mts mod to
a Henry 3K-A, if it's possible.
>
> 73's de Javier
> _______________________________________________
> Topband mailing list
> Topband@contesting.com
> http://lists.contesting.com/mailman/listinfo/topband
>
>
>
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|