| To: | <topband@contesting.com> |
|---|---|
| Subject: | Topband: Tough ladder line for a tough job |
| From: | "SJ" <superberthaguy@adelphia.net> |
| Date: | Thu, 29 Jul 2004 14:36:41 -0400 |
| List-post: | <mailto:topband@contesting.com> |
Any advice on a brand of "very tough" 600 ohm ladder line appreciated. It will be used it to feed a collinear dipole yagi hanging from a catenary at 200ft. So the ladder line will be "swinging in the wind" between the catenary at 200 feet and the tuner on the ground. 73, Scott W3TX _______________________________________________ Topband mailing list Topband@contesting.com http://lists.contesting.com/mailman/listinfo/topband |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Topband: Remotely Switching Between Capacitors, Ben Champion |
|---|---|
| Next by Date: | Re: Topband: two wires Beverage, Roger D Johnson |
| Previous by Thread: | Topband: YV0D, W7lr |
| Next by Thread: | Re: Topband: Tough ladder line for a tough job, Tim Duffy K3LR |
| Indexes: | [Date] [Thread] [Top] [All Lists] |