allan1 dejazzd.com wrote:
> Thank you all for your input on the inverted L
> I have the PRO111which has a separate rcv ant input.
>
> Can I assume that when I hook up another antenna such as an ewe or loop to
> the receive antenna input, that the received signals on top band will be a a
> combination of the L and the EWE.
> If so that means that I am not getting the full affect of the EWE. Do I need
> a separate TR switch for 160? To minimize all the other coax lines from my
> other antennas coming into the shack, I use a remote coax switch. The above
> might complicate things since I have a common coax line.
>
> Any thought would be appreciated
>
> Thanks
> Allan W2TN
>
>
That's not the case. Your Pro III will receive on the antenna
specified, not both. You select the receive antenna port by pressing
the ANT button and holding it down for a second. The antenna selected
will change to "1/R", indicating you'll transmit on antenna 1 and
receive on the antenna connected to the receive jack. If you normally
use the "2" antenna for 160, you'll get "2/R" when you hold the button
down.
73, K8AC
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|