I am using an inverted V that is tuned for 80 meters for my TopBand Antenna and
configuring it as a T vertical. I am wanting to
design and install a ground radial system for it.
Since the center conductor and shield of the feedline are tied together here in
the shack in a T vertical where do you connect the
ground radial system to the antenna. On a vertical it goes to the shield. But a
T vertical has the shield shorted to the center
conductor.
I am reading ON4UN's Low-Band Dxing and am looking at figure 8-20 on page 8-18
of Chapter 8, but it really doesn't detail the
installation of the ground radial system.
Tnx Bob AD5VJ
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|