One not too secret secret is to place the noise canceler inline with
the receiver output/input jacks (if has them), instead of inline with
the antenna in/out fitting on the radio...connect the receiver output
jack to the noise canceler antenna jack, the noise canceler radio
jack to the rig's receiver input jack, and add a properly polarized
sense antenna to the noise canceler's auxiliary antenna fitting...no
transmit RF through the noise canceler means no RF interference is
created...hope this is of some help to those not familiar this
approach which has been discussed by several others.
73 Gary NL7Y
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|