I now have an Aluminum Lattice Tower.
It measures 12" across, has 8' sections and assembles to approx 67' tall.
I am wanting to make a vertical for 80 out of it and have about three wires
attached to the top in order to make a top loaded
vertical for 160.
I have one section to put in the ground and then a solid very strong fiber
glass rod (1 1/2" diameter) to mate the top section to
the section in the ground. Then run radials from the section in the ground and
make a matching network.
I found this article as a construction guide and would like your opinions as to
whether this will work.
http://www.isp.ca/ve3nh/linvert.htm
73 fer nw es gud DX,
QSL VIA: LotW, BUR, e-QSL
Bob AD5VJ
http://www.ad5vj.com/
Old Calls WB5ZQU, WY5L/KH3, KE5CTY, N5IET
Member:
NTCC, CTDXCC, STXDXCC
10X#-37210, SMIRK#-5177
FISTS#-12637, SKCC#-2369
NAQCC#-1966, FP#-1141, RARS#-149
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|