> 1. Radial Wire? (Jim Murray)
>
>
>----------------------------------------------------------------------
>
>Message: 1
>Date: Sun, 20 Jul 2008 13:27:39 -0700 (PDT)
>From: Jim Murray <adkmurray@yahoo.com>
>Subject: Topband: Radial Wire?
>To: Topband@contesting.com
>Message-ID: <189769.22724.qm@web63804.mail.re1.yahoo.com>
>Content-Type: text/plain; charset=iso-8859-1
>
>Hello All,
>Found a large spool of wire at a local town wide yard sale yesterday
>for 2 bucks.? The spool is nearly full and pretty heavy.? Someone
>wrote telephone wire on the spool and I think that's correct.? The
>cable itself is marked "2x22 BDW A Superior Essex T10/03 05074
>feet.? It has the rubber shield on the outside followed by a thick
>layer of aluminum and 4 wires inside.? Contemplating using this for
>more radials on my inv L (don't know what else I'd do with it)?and
>wondering the best way to handle it.? First thought is to just
>solder all conductors together along with the aluminum casing on one
>end and attach it to my radial ring with a more manageable jumper
>wire and leave the far end as is.? Have not measured the 4 wires
>inside but appear to be abt 18ga.? Any thoughts on the best use of
>this wire for radials??
>Cheers,
>Jim/k2hn
>
Have at it. Use Burndy nuts in lieu of solder and a jumper to the vertical.
A Burndy nut is a copper/brass U with a bolt mandrel that will give
you a good compression electrical connection.
73, Craig Clark, K1QX
RADIOWARE AND RADIO BOOKSTORE
PO BOX 209
RINDGE NH 03461
603 899 6957
WWW.RADIO-WARE.COM
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|