To: | topband@contesting.com |
---|---|
Subject: | Re: Topband: down hill slope for a beverage |
From: | Tree <tree@kkn.net> |
Date: | Sat, 23 May 2009 09:04:57 -0700 |
List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
On Sat, May 23, 2009 at 07:45:30AM -0400, Jon Zaimes AA1K wrote: > In the 1990s, I had a 660-ft Beverage at previous QTH in northern > Delaware that went from 90 feet elevation to 30 feet elevation. My Japan / SouthEast beverage is similar to this. One end is about 80 feet above the other - over a distance of about 500 feet. It is a single wire with relays and ground rods. It works very well in both directions. Tree N6TR/7 _______________________________________________ Topband mailing list Topband@contesting.com http://lists.contesting.com/mailman/listinfo/topband |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Topband: Vertical offset from center of radial field, Charles Bibb |
---|---|
Next by Date: | Re: Topband: down hill slope for a beverage, Bill Tippett |
Previous by Thread: | Re: Topband: down hill slope for a beverage, K4RO Kirk Pickering |
Next by Thread: | Topband: down hill slope for a beverage, VE3MGY |
Indexes: | [Date] [Thread] [Top] [All Lists] |