I'd put a 1/4 wave vertical (tower) in the center of the square (or as
tall as you can make it), radials filling the square. Then add parasitic
wires spaced 1/8 wave from the tower (66 feet) as in the K3LR array
described in ON4UN's book). The radial field is a bit truncated in your
area but should still get good f/b -- better than a triangle array --
and some gain. Mine (full size) sometimes is better than Beverages for
receive.
If this is the "back yard" perhaps some Beverages could stretch into
your other area for RX.
73/Jon AA1K
>
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|