Hello to all.
First sorry for my bad English language, you may find english mistakes in my
post.
I am FO8RZ Phil in Tahiti until 2011.
I am running 100 watts only in CW and sometimes RTTY.
I use yagi up 6 meters for 10-15-20, a inverse vee for 40-80, and HF6V (with
warc kit) for 30-17-12.
I took also from France the 160 meters kit.
I used it in F, but it was very hard for me to contact stations out of Europe.
Many stations asked me to operate on top band. So, I will install this week-end
the 160 meters kit on the HF6V.
I would like to know the length of the radials I have to use.
My garden is not big, the antenna is close the neighbour, so impossible to put
150 radials on 360°.
I fou want to see how is installed the antenna, go to
http://f5phw.chez.com/plugins/diaporama/diaporama.php?lng=en&diapo_id=6
On the butternut notice, they tell : L = 240/f
L in feet
f in Mhz
For 1.820 Khz, it is 131.87 ft
I think, I will be able to put only 2 radials.
The first beamed to the 045 (USA) on 21 meters and after with a 90 corner to
the right.
The second one beamed to the 180 and with 1 corner and beamed after to the 045.
My garden is not a big one.
Is it better to use 1 radial beamed to 045 or 2 ?
All the best 73
FO8RZ Phil
http://f5phw.chez.com/
_______________________________________________
Topband mailing list
Topband@contesting.com
http://lists.contesting.com/mailman/listinfo/topband
|