Topband
[Top] [All Lists]

Re: Topband: LINEAR vs TOP LOADING

To: "Bill and Liz McHugh" <magoo@isp.ca>, <topband@contesting.com>
Subject: Re: Topband: LINEAR vs TOP LOADING
From: "ZR" <zr@jeremy.mv.com>
Date: Sat, 23 Apr 2011 10:04:42 -0400
List-post: <topband@contesting.com">mailto:topband@contesting.com>
The linear loaded KLM 40 and 80M yagis never lived up to their hype. OTOH 
the little Cushcraft 2el 40 with loading coils plus a capacity hat way out 
on the elements is a proven winner.

Ive sold one of my 40M 4el KLM's and made a pair of CC style 2el from the 
other.

Carl
KM1H




----- Original Message ----- 
From: "Bill and Liz McHugh" <magoo@isp.ca>
To: <topband@contesting.com>
Sent: Saturday, April 23, 2011 8:02 AM
Subject: Topband: LINEAR vs TOP LOADING


> My first 160M vertical was linear-loaded and it worked fine....or so I 
> thought.  The late K6SE did an EZNEC analysis of my antenna vs what I am 
> using now, which is an 80 ft top-loaded (three wires) and his analysis 
> showed a considerable improvement in efficiency moving to the top-load.  I 
> have a smaller version at our summer place and it is 61 ft top-loaded-it 
> also works very well.  I have been able to work much more DX running 
> barefoot and QRP with the top-loads as compared to the linear-loaded 
> vertical..  While this is just a subjective evaluation on my part, it is 
> supported by the EZNEC analysis which showed an increase of several 
> percent in the efficiency of the top-load antenna.
>
> Bill VE3NH/VE3CSK
> _______________________________________________
> UR RST IS ... ... ..9 QSB QSB - hw? BK 

_______________________________________________
UR RST IS ... ... ..9 QSB QSB - hw? BK

<Prev in Thread] Current Thread [Next in Thread>