| To: | richard@karlquist.com, topband <topband@contesting.com> |
|---|---|
| Subject: | Re: Topband: 2 wire beverage question |
| From: | Mike Waters <mikewate@gmail.com> |
| Date: | Thu, 29 Nov 2012 10:24:33 -0600 |
| List-post: | <topband@contesting.com">mailto:topband@contesting.com> |
Correction: In my last message, I calculated the impedance at 60" high. These are the impedances at 120" high: Two 10' high 14 AWG wires spaced 12" would have an impedance of 710 ohms. The impedance of both wires to ground would be 357 ohms. 73, Mike www.w0btu.com _______________________________________________ Topband reflector - topband@contesting.com |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: Topband: 2 wire beverage question, Mike Waters |
|---|---|
| Next by Date: | Topband: High noise with Rx antennae, Gary Smith |
| Previous by Thread: | Re: Topband: 2 wire beverage question, Mike Waters |
| Next by Thread: | Re: Topband: 2 wire beverage question, Richard (Rick) Karlquist |
| Indexes: | [Date] [Thread] [Top] [All Lists] |